Introduction
- The one and only, true 100% DIY-friendly, 6×6, Surface Mounted, Partial Octagon Gazebo Brackets Kit by RioOutdoors.com…
- Surface Mounted, Open Top, Wall Attached, Partial Octagon Gazebo Brackets Kit is made to be surface mounted against a wall on existing concrete pad, new concrete pad, new concrete footings, concrete pier blocks, or wood decks with additional load transfer posts under the octagon gazebo posts.
- L-shaped brackets are included in this kit and are to be used to secure two vertical posts to the wall.
General Information
- First to market 45-degree post top elbow brackets make constructing a perfect octagon shaped outdoor living space a breeze.
- True DIY-friendly design allows 2 people to build the main gazebo structure within 2 hours.
- Gusseted construction provides ultimate load resistance and sway resistance.
- Gussets eliminate the need for wooden corner gussets and provide a wide open living space appearance.
- Designed to construct a high quality and high strength structure which will last for a lifetime.
- Thoughtfully engineered gazebo bracket designs provide easy installation without any wood working skills, low labor time, low effort, and low net cost and reduce injury risks.
- Flexible designs of the brackets allow for unlimited shapes, sizes, and aesthetics configurations.
- Eliminates the need to outsource skilled laborers and makes outdoor living space creation affordable.
- You select the lumber type and acquire it. Avoid low quality and low grade imported soft wood lumber gazebo kits sold at big box stores which deteriorate within 3 seasons.
Octagon Size
- The size shown in the Kit Description (e.g., 10 to 13ft. Wide Solid Roof) defines the width between two parallel Octagon walls.
- The size of a Partial Octagon structure is defined by the outer width dimension between two parallel walls of the Partial Octagon structure.
- To determine what size Octagon will fit in the space available in your yard, include and add the extra space required for the roof overhangs past the Octagon walls. We recommend a 12″ roof overhang past the Octagon walls.
- The size of the octagon you can build employing this bracket kit (measuring across two parallel walls) ranges from 10 feet to 20 feet, depending on the length of the headers.
- The living space you can create ranges between 62 sq. ft to 249 sq. ft.
- Detailed specifications for header length to octagon size and living area are provided in the Instructions Manual.
The solid roof kit is designed to eliminate all wood joinery skills requirements.
-
- All roof brackets are designed to provide superior structural support and strength to the structure, far exceeding the strength provided by wood joinery.
- The brackets simplify wood members cutting and adding end treatments.
- The brackets provide precise fit and alignment yielding an architechtural roof structure.
Parts included with all Partial Octagon Solid Roof Kits:
Qty 1, Partial Octagon, 5-way, Spider Bracket
Qty 1, Octagon Open End Rafter Bracket
Qty 1, Truss Center Joints Bracket
Qty 1, Butt-Joint Plate, LH
Qty 1, Butt-Joint Plate, RH
Qty 1, Truss End U-Channel Bracket, LH
Qty 1, Truss End U-Channel Bracket, RH
¼”x1-1/4” Blk Lag Screws
Additional Parts included with various Partial Octagon sizes:
10ft. to 13ft Wide, Solid Roof includes:
Qty 12, Octagon Cross Tie Brackets
Qty 6, Butt Joint Rafter Tie Brackets
13-1/2ft. to 16-1/2ft. Wide, Solid Roof includes:
Qty 16, Octagon Cross Tie Brackets
Qty 8, Butt Joint Rafter Tie Brackets
Qty 1, Partial Octagon Ridge Rafter Tie Bracket
Qty 2, Partial Octagon Ridge Rafter Skirt Tie Bracket
17ft. to 20ft. Wide, Solid Roof includes:
Qty 24, Octagon Cross Tie Brackets
Qty 10, Butt Joint Rafter Tie Brackets
Qty 1, Partial Octagon Ridge Rafter Tie Bracket
Qty 2, Partial Octagon Ridge Rafter Skirt Tie Brackets
Lumber size
- Uses dimensional 6×6 posts and headers lumber members.
- 6×6 PT Lumber can vary in size, greatly. Use a power planar to reduce size to 5-1/2″ x 5-1/2″ at lumber ends, if lumber is larger than 5-9/16″ x 5-9/16″.
- The roof structure [rafters, cross tie beams, and roof skirts] shall be constructed using 2×6 or 2×8 lumber for Octagon structures up to 16 feet wide and using 2×8 lumber for Octagon structures exceeding 16 feet wide.
- Lumber is not included.
What is included
- All brackets required to build each gazebo kit are included.
- Brackets are powder painted black. They may be spray painted over with any exterior grade paint.
- Brackets are made from 1/8″ thick welded steel for high strength and load resistance.
- All wood lag screws required to build each gazebo kit are included.
Peter Robinson –
Stunning.
Julie Comreid –
We built our wall attached gazebo to a 16×16 size. Riooutdoors.com supplied us complete cut lists, and custom installation instructions. They were accurate, professional, and very easy to follow.
We highly recommend Riooutdoors.com and their products. Couldn’t be happier with the final results.
Dorothy Hughes –
Bravo! We enjoyed building our new partial octagon wall attached gazebo. The cut list and installation instructions supplied by RioOutdoors was professional and accurate, easy to follow, step by step. We are motivated to build an addition in the front-side of our home now. We highly recommend this DIY kit.
Bryan Brown –
The toughest work building this gazebo was lifting and moving wet 6×6 lumber. We definitely wondered why we were so hung up on using 6×6 size lumber instead of 4x4s. Next project, 4x4s it will be. Beside that, however, we were very pleased with all the detailed instructions supplied by riooutdoors. The roof structure was a breeze to assemble. Preparing the lumber ends with compound miter cuts was super simplified using the technique rioutdoors taught us. All parts fit easily and precisely. We are very happy with end results.
Robert Jones –
Good parts, good instructions, good friends made for a very enjoyable project. 2 and out! 2 days and all done! Very happy.
Tony Garcia –
Whats not to like when you are building a structure worth $10K for only $3.5K and retaining such high sweat equity. Work is made very easy by riooutdoors. Their parts are high quality, easy to bolt on, and they provide every single details to prepare every piece of wood we used. In the end, we have a very high end add on gazebo which extends our living space outdoors to the backdoor concrete pad that we never used before. My wife is in love with this new space. She hangs out there all the time now.